Original price was: $199.99.$189.99Current price is: $189.99.
Dominate the skies with the GEPRC TAKER F722 100A 8S Stack. Featuring a high-speed F722 Flight Controller and a robust 100A FPV Stack, this Racing Drone Electronics kit is built for extreme 8S power.
The GEPRC TAKER F722 100A 8S Stack is a powerhouse designed for the most demanding FPV applications, from heavy-lift cinelifters to high-voltage racing rigs. At its core, the STM32F722RET6 MCU provides the high-speed processing power expected from a premium F722 Flight Controller, ensuring low latency and precise control. Paired with a massive 100A BLHeli_S ESC, this 100A FPV Stack is engineered to handle massive current draws without breaking a sweat, making it a cornerstone for professional Racing Drone Electronics.
Stability is paramount, which is why GEPRC integrated the ICM42688-P gyroscope to deliver ultra-smooth flight characteristics even in turbulent conditions. Uniquely capable of supporting up to an 8S LiPo input, this 8S FPV Power System offers incredible overhead for pilots seeking maximum thrust and efficiency. The dual BEC system (5V/3A and 12V/2A) ensures that your high-voltage VTX and other peripherals receive clean, consistent power throughout your flight. Whether you are pushing the limits of speed or carrying expensive camera gear, the GEPRC TAKER F722 100A 8S Stack delivers the reliability and performance required for elite-level FPV.
Oct 10, 2025:
The flight controller firmware has been changed to: GEPRC_TAKER_F722_8S. If you still use the TAKERF722SE firmware for flash, you need to add the definition of “USE_BARO USE_BARO_DPS310” before flash the firmware, and after burning the firmware, enter the following command in the CLI:
set pinio_box = 40,41,255,255
save
betaflight_4.5.2_STM32F7X2_GEPRC_TAKER_F722_8S(251009)
1. Uses the mainstream STM32F722 chip
2. Equipped with the latest 42688-P gyroscope
3. 16M onboard black box storage
4. Integrated LC filter
5. Upgraded Type-C USB interface
6. Directly plugs into the DJI Air Unit
7. Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC, providing a smooth flying experience
8. Simple and efficient installation method with shock absorbers for stable gyroscope performance
9. Dual independent BECs: 12V@3A and 5V@3A
10. Supports 8S Lipo batteries
11. Support direct insertion of 8 motors
Specifications
TAKER F722 8S Flight Controller
TAKER H100_8S_BLS 100A 4IN1 ESC
1 x TAKER F722 8S Flight Controller
1 x TAKER H100_8S_BLS 100A 4IN1 ESC
1 x Electrolytic capacitor(50V 4700uF)
1 x DJI connection cable(SH1.0 6pin 100mm)
2 x FC adapter cable(SH1.0 8pin 30mm)
1 x Receiver silicone cable(SH1.0 4pin 150mm)
1 x Camera connection cable(SH1.0-SH1.25 3pin 135mm)
1 x VTX connection cable(SH1.0 4pin-6pin 100mm)
1 x XT90 battery plug
1 x Red and black power cable(10AWG 240mm)
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts(M3)
12 x Silicone anti-shake pads(M3)
No reviews yet.
24/7 Technical Support
Free Worldwide Shipping
Certified High-Performance
— HIGH-PERFORMANCE FPV ELECTRONICS —
© 2026 WYECS Store All Rights Reserved.
Subscribe to our newsletter
Get the latest updates on new products and upcoming sales
— HIGH-PERFORMANCE FPV ELECTRONICS —
© 2026 WYECS Store All Rights Reserved.
Subscribe to receive new arrivals, restocks, and limited-time offers.